HC02 battery balancer is used in series connected battery packs to maintain the charge and discharge balance between each battery. During the operation of series connected batteries, due to differences in the chemical composition and temperature of the battery cells, there may be differences in the charge and discharge of the two batteries Even when the battery is idle, different degrees of self discharge can cause imbalance between batteries connected in series.
Application
Home Energy
Light System
Energy Station
Solar Power
Feature:
①LED Tube Display ②High precision chips reduce component deviations ③Simple wiring and low power consumption ④Ultra-fast balance speed ⑤Supports the combination of multiple modules ⑥Flame retardant shell facilitates customer installation ⑦Suitable for 4 series of 12V lead-acid batteries or lithium battery packs
Specification:
Model No
HC02
Battery nominal voltage
4 x 12V
Optimizing current
0-10A
Quiescent current
<50mA
Under voltage lock out
1.8V
Protection
Reverse polarity protection
Dimensions
62x124x27mm
weight
0.45kg
Extend connect wire
16awg 50cm with M8 ring
Installation:
① >> 5 tips before connect battery equalizer
①. Fully charge the battery,it is important. ②. Using the same type of battery ③. Use batteries of the same old and new condition④.Same battery capacity within the battery group⑤.Voltage difference of each battery is less than 0.2V
② >> Proper use of plastic sheaths for wiring terminals
①. The red wire connect the positive pole of battery,the black wire connect the negative pole. ②. Connect the multiple batteries in the above manner. ③. Dispose unused battery wires to avoid short circuits.
Please read the instruction manual before installing the device! before connect the battery equalizer,please confirm the positive and negative poles of the battery pack to avoid the short circuit and reverse connection between the battery equalizer terminal.